HOME
PRODUCTS
BLOWN FILM LINE
TWO-LAYER~FIVE-LAYER CO-EXTRUSION HIGH SPEED BLOWN FILM LINE

Products

THREE LAYER CO-EXTRUSION

*2010K-Show :

Specification
Video
Photograph
Device

MODEL		KS-CFLL50+55T	KS-CFLL55+65T	KS-CFLL65+75T	KS-CFLL75+85T
FEATURE	MATERIAL TO BE USED	LDPE LLPDPE HDPE EVA PP
	MAX. FILM WIDTH	1100 mm	1500 mm	1800 mm	2200 mm
	THICKNESS OF FILM	0.02~0.25 m/m
	MAX. EXTRUSION OUTPUT	235 kg/hr	350 kg/hr	480 kg/hr	650 kg/hr
EXTRUDER	SCREW DIA.	50 mm × 2 55 mm × 1	55 mm × 2 65 mm × 1	65 mm × 2 75 mm × 1	75 mm × 2 85 mm × 1
	SCREW L/D	30 : 1	30 : 1	30 : 1	30 : 1
	SCREW / CYLINDER MATERIAL	SACM 645 STEEL WITH HARD WITH NITROGEN TREATMENT, HARDNESS 75 OR OVER
	CYLINDER COOLING	½ HP × 7	½ HP × 9	½ HP × 10	½ HP × 12
	DRIVING MOTOR	25 HP × 2 40 HP × 1	40 HP × 2 50 HP × 1	50 HP × 2 75 HP × 1	75 HP × 2 100 HP × 1
	HEATER CAPACITY	35 kw	45 kw	60 kw	75 kw
	DIES (mm)	200/250 ø	300/350 ø	350/400 ø	400/450 ø
	TEMPERATURE CONTROL	17 point	19 point	22 point	22 point
	COOLING EQUIP	7½ HP	10 HP	15 HP	20 HP
TAKE-UP UNIT	TYPE	FIXED TYPE / OSCILLATING TYPE
	PINCH ROLLER (mm)	165 ø × 1200L	165 ø × 1600L	215 ø × 1900L	215 ø × 2300L
	TAKE-UP MOTOR	2 HP	2 HP	3 HP	3 HP
	TAKE-UP SPEED (m/min)	6 ~ 60	6 ~ 60	6 ~ 60	6 ~ 60
	SUB-PINCH ROLLER (mm)	100 ø × 1200L	140 ø × 1600L	140 ø × 1900L	140 ø × 2300L
	GUIDE MOTOR	30 kg/cm	50 kg/cm	50 kg/cm	50 kg/cm
WINDING UNIT	FWC TYPE	ONE STATION SURFACE WINDER WITH AUTOMATIC BOBIN CHANGE
	EFFECTIVE WIDTH	1100 mm	1500 mm	1800 mm	2200 mm
	DIA. OF FILM WOUND-UP ROLL	800 mm	800 mm	800 mm	800 mm
	WINDER MOTOR	2 HP	2 HP	3 HP	3 HP
	DIMENSION (L×W×H) (M)	7.0×4.8×8.0	8.0×5.3×9.0	10×6.2×10	12×7×12
OPTIONAL DEVICE	GRAVIMETRIC DOSING UNIT. THICKNESS MEASUREMENT. WIDTH CONTROLLER. (IBC) INTERNAL BUBBLE COOLING COMPUTER CONTROL SYSTEM. LINE SPEED SYNCHRONIZED WITH COMPUTER CONTROL. AUTOMATIC HOPPER LOADER. FILM SURFACE TREATER. PRESSURE GAUGE. ROTARY DIE. TWO STATIONS SURFACE WINDER. OSCILLATIN TAKE UP UNIT. CHILLER. HEAT SLITTING DEVICE. EDGE POSITION CONTROL. ELECTRONIC TENSION CONTROL. PIB PUMP SYSTEM. CRANE FOR DIE. AIR SHAFT. FIVE LAYER CO-EXTRUSION DIE.

*Specifications are subject to change without notice for improvement.

MODEL:

KS-CFLL50+55T
KS-CFLL55+65T
KS-CFLL65+75T
KS-CFLL75+85T

Products

THREE LAYER CO-EXTRUSION

KS-CFLL55+65T

KS-CFLL65+75T

KS-CFLL50+55T

KS-CFLL55+75T

KS-CFLL75+85T