Location | Sitemap | E-Catalog

Products

SINGLE HEAD HIGH SPEED BLOWN FILM LINE

SINGLE HEAD HIGH SPEED BLOWN FILM LINE

SINGLE HEAD HIGH SPEED BLOWN FILM LINE 　 BACK
  • Specification
  • Video
  • Photograph
  • Device
MODEL   KS-E40 KS-E45 KS-E50 KS-E55 KS-E65
FEATURE LAYFLAT WIDTH   350 m/m   500 m/m   600 m/m   700 m/m   1000 m/m
THICKNESS OF FILM   0.005~0.08 m/m
MAX. EXTRUSION OUTPUT   40 kg/hr   50 kg/hr   65 kg/hr   90 kg/hr   135 kg/hr
EXTRUDER SCREW DIA.   40 m/m ø   45 m/m ø   50 m/m ø   55 m/m ø   65 m/m ø
SCREW L/D   30 : 1   30 : 1   30 : 1   30 : 1   30 : 1
SCREW CYLINDER MATERIAL   SACM 645 STEEL WITH HARD WITH NITROGEN TREATMENT
CYLINDER COOLING BLOWER   ¼ HP × 2   ¼ HP × 2   ¼ HP × 1
½ HP × 1 		  ½ HP × 3   ½ HP × 3
DRIVING MOTOR   15 HP   20 HP   25 HP   40 HP   50 HP
HEATER CAPACITY   10 kw   14 kw   18 kw   20 kw   25 kw
DIES   35/50 mm ø   60/75 mm ø   70/100 mm ø   90/120 mm ø   120/150 mm ø
CONTROL PANEL TEMPERATURE CONTROL   4 ZONES   4 ZONES   6 ZONES   7 ZONES   7 ZONES
COOLING EQUIP BLOWER   1 HP   3 HP   5 HP   5 HP   7½ HP
TAKE-UP UNIT TYPE   FIXED TYPE
PINCH ROLLER (m/m)   165 ø ×  400 L   165 ø ×  550 L   165 ø ×  650 L   165 ø ×  750 L   165 ø ×  1100 L
TAKE-UP MOTOR   ½ HP   1 HP   1 HP   2 HP   2 HP
TAKE-UP SPEED (m/min)   12 ~ 120   12 ~ 120   12 ~ 120   12 ~ 120   12 ~ 120
SUB-PINCH ROLLER (m/m)   100 ø × 400 L   100 ø × 550 L   100 ø × 650 L   100 ø × 750 L   100 ø × 1100 L
GUIDE MOTOR   15 kg/cm × 1   15 kg/cm × 1   20 kg/cm × 1   20 kg/cm × 1   20 kg/cm × 1
WINDING UNIT TYPE   ATTACHED TYPE, SURFACE, MANUAL TYPE
BOBBIN CHANGE
DIA. OF FILM WOUND-UP ROLL   800 mm   800 mm   800 mm   800 mm   800 mm
EFFECTIVE WIDTH (m/m)   350   500   600   700   1000
WINDER MOTOR   ½ HP   1 HP   1 HP   2 HP   2 HP
SHIPPING DATA DIMENSION (L×W×H) (M)   3.8×2.2×3.5   4.0×2.3×4.0   5.0×2.5×4.2   5.3×2.7×4.7   5.5×3.2×6.3
OPTIONAL DEVICE
Gravimetric Dosing Unit Oscillating Take Up Unit
IBC (Internal Bubble Cooing Computer Control System) Line Speed Synchronized with Computer Control
Thickness Measurement Two Stations Surface Winder
Thickness Controller Chiller
Automatic Hopper Loader Heat Slitting Device
Film Surface Treater EPC (Edge Position Control)
Pressure Gauge Electronic Tension Control
Rotary Die Crane for Die and Air Shaft
Automatic Gauge Control with
Automatic Cooling Ring 		PIB Pump System (For LDPE/LLDPE)
*Specifications are subject to change without notice for improvement.
MODEL:
KS-E40  
KS-E45  
KS-E50  
KS-E55 Video
KS-E65  

KS-E35

KS-E40

KS-E45

KS-E50

KS-E55

KS-E65